160 Beechboro Road South                     Bayswater WA 6053

About Compri Tube Clean

This innovative Australian company was first founded in 1972 as Compri Technic Pty. Its vision then was to revolutionise tube, hose and pipe cleaning equipment.  

In close co-operation with Curtin University and the government, the Compri Tube Clean system, Contaminator Eliminator System (CES), began its development.

The early launchers and projectiles proved to have a major influence on hose, tube and pipe cleaning technology. The technologically advanced product range that offered a dry cleaning process for hose, tube and pipes, eliminating the need to use chemicals and solvent flushing. The initial market response was excellent, with major international enterprises committing to use the product for hydraulics and pneumatics. These included QANTAS, Caterpillar, Woodside and the Australian Defense Force. Contamination elimination systems traveled long distances though complex systems and was dry. This resulted in the benefits of significant reduction of cost and time in cleaning, improved product and process performance, elimination of solvents and toxic means of cleaning and less effluent. 

Years of research and development and listening to our customers to address their needs fine tuned Compri Tube Clean's products to the high standard they are today. Compri spawned several competitors who have reversed engineered the product to produce imitations.  Whilst many other companies attempt to copy the products of Compri Tube Clean, none can compare with the guaranteed quality of our products. 

Innovation has always been at the root of Compri Tube Clean's success in the past and it will continue to be at critical support function in the future.

Our Products

Our projectiles are based upon environmentally friendly molded and flexible polyurethane foam projectiles, which are compacted and propelled by means of compressed air at speeds of up to 15 meters per second though hose, tube and pipes. 

The projectiles clean hoses, tubes and pipes line with ease. Right angle bends, T-pieces; turns and windings, ball and though valves are all easily negotiated.

The system works by pneumatically launching the projectile that is 20% larger than the internal diameter of the hose, tube or pipe to be cleaned. As the projectile moves forward, driven by compressed air, it expands against the internal surface of the hose, tube or pipe moving the contaminants in front of it, be they liquids or solids. It does not matter how many bends there are or whether they cross at right angles as long as both ends are open to the atmosphere at the same time. One end for the launcher to be butted up, the other end is then free for the projectile and contaminants to be discharged.

Why Us?

With the Compri Tube Clean system, hoses, tubes and pipes in any length and size to 200 mm in diameter can be cleaned, fast, reliably, economically and in an environmentally friendly manner.