COMPRI TUBE CLEAN PTY LTD
160 Beechboro Road South                     Bayswater WA 6053



Our Products

Standard Projectiles  

Standard Projectiles are made of high density Polyurethane foam. Typical applications are hose and tubes without restrictions and the manufacturing industry for product recovery of extremely viscous materials such as chocolate, glue etc. Will negotiate right angle bends, coils and T-Junctions. When selecting the correct projectile choose one approximately 20% larger then the internal diameter of the hose tube or pipe to be cleaned.

Coupling Projectiles

Coupling projectiles are medium density polyurethane foam; this foam has a high tear resistance and is extremely compressible. Used extensively in the hydraulics and manufacturing industry for product recovery. Will negotiate right angles bends, coils, T sections and pipe reductions with ease. When selecting the correct projectile choose one approximately 20% larger than the internal diameter of the hose, tube or pipe to be cleaned.

Product Recovery Projectiles

Product recovery projectiles are made of low-density polyurethane foam. This is extremely compressible (up to 70%). Projectile is used for cleaning lines with large variations in diameter. Completely harmless to heath and hygiene, these projectiles are utilized for recovering or removing existing products in food, beverage, health, cosmetics and chemical processing lines. Loss of production time for product changes and disposing of costly contaminated waste is significantly reduced. When selecting the correct projectile choose one approximately 20% larger than the internal diameter of the hose, tube or pipe to be cleaned.

Abrasive Projectiles

Abrasive projectiles are made of high-density Polyurethane foam with an abrasive pad on the front end. Ideal for removing rust and mill scale from metal pipes. Used for the cleaning of boiler tubes, condenser tubes, carbon deposits from oil feed lines, etc. Will negotiate right angle bends, coils and T sections. When selecting the correct projectile choose approximately 20% larger than the internal diameter of the hose tube or to be cleaned.

Grinding Projectiles

Grinding projectiles are high density polyurethane foam coated with an aluminium oxide. Very aggressive, used for heavy duty cleaning of metal tubes and pipes to remove heavy rust, etc. Will not easily negotiate sharp bends, best suited to straight tube or swept bends. When selecting projectiles choose one as near to the internal diameter as possible, maximum 5% over size.

A PDF version of this can be found here:

Projectile Description.pdf Projectile Description.pdf
Size : 258.776 Kb
Type : pdf